Cabinet shelves that rest on movable pegs or clips instead of being fixed in place, letting you raise or lower them to fit taller items.
A countertop cabinet with a roll-up or lift-up door that hides small appliances like toasters and mixers while keeping them within reach.
Drawer slides that ride on small steel ball bearings for smooth, quiet, heavy-duty movement, commonly used with full-extension drawers.
A fast-growing, renewable grass milled into a hardwood-like material for cabinet doors and boxes; prized for durability and eco-friendliness.
A standard-height cabinet, typically 34.5" tall, that sits on the floor beneath the countertop and forms the lower run of a kitchen.
A base cabinet installed at a 45-degree angle in a corner, maximizing otherwise wasted corner space with a diagonal front face.
A decorative panel made of narrow, vertical grooved boards, often used as a cabinet door insert or backsplash for a cottage-style look.
A light-colored, fine-grained hardwood used for cabinet doors and boxes; takes stain well and is a cost-effective alternative to maple.
A short wall cabinet installed above a range hood, refrigerator, or window to fill the gap up to standard upper cabinet height.
A pair of cabinet doors that meet flush in the middle with no center stile between them, common on frameless cabinetry.
Small mechanical fasteners consisting of a cam and a dowel or bolt, used to join RTA cabinet panels together without visible screws.
The basic box structure of a cabinet — the sides, top, bottom, and back — before doors, drawers, and face frames are added.
An arched, pointed panel profile on a cabinet door that resembles a cathedral window, offering a more ornate, traditional look.
The vertical piece of wood running down the middle of a face frame opening, dividing it into two sections for a pair of doors.
A reddish-brown hardwood that darkens with age and light exposure; popular for its rich color and smooth, fine grain in cabinetry.
A cup-style hinge that mounts inside the cabinet, hidden from view when the door is closed, allowing for clean, uninterrupted door fronts.
A decorative wood bracket, often scrolled or carved, used to support a countertop overhang or accent the underside of upper cabinets.
Decorative trim installed along the top of wall cabinets where they meet the ceiling, adding a finished, custom-built appearance.
A rectangular groove cut into a wood panel so another panel can slide or fit into it, used to join cabinet shelves and sides securely.
Non-functional door fronts, often with glass or mullion detailing, applied to cabinet ends or islands purely for visual interest.
A trim style featuring a repeating pattern of small, tooth-like rectangular blocks, typically used under crown molding for a classic look.
A matching cabinet-finish panel applied to the front of a dishwasher so it blends in visually with the surrounding cabinetry.
Short for "Do It Yourself" — describes RTA cabinets designed to be assembled and installed by homeowners without professional labor.
A joinery method using interlocking trapezoidal cuts, most commonly seen on drawer boxes, prized for strength and resistance to pulling apart.
The visible, finished face of a drawer that attaches to the drawer box and matches the cabinet door style and finish.
Decorative, non-opening doors installed in tight spaces, over plumbing, or on cabinet ends to maintain a consistent, uniform look.
Finished panels applied to the exposed sides of cabinets — such as at the end of a run — to hide the unfinished carcass side.
Manufactured wood products, such as plywood or MDF, made by bonding wood fibers, veneers, or particles together for consistent strength and stability.
Drawer glides finished with a protective epoxy coating that resists rust, wear, and corrosion in humid or heavy-use environments.
A visible hinge mounted on the outside face of a cabinet door, often decorative, commonly used on inset or traditional-style cabinetry.
A frame of solid wood attached to the front of a cabinet box, adding structural rigidity and providing a surface for hanging doors and drawers.
A narrow strip of matching wood used to fill gaps between cabinets, walls, or appliances so doors and drawers can open without obstruction.
The topcoat applied to cabinetry — such as stain, paint, or lacquer — that determines color, sheen, and protection from moisture and wear.
A decorative detail featuring a series of shallow, parallel grooves, often used on pilasters, stiles, or trim for added texture.
A cabinet construction style built with a face frame across the front of the box, typical of traditional American cabinetry.
A cabinet construction style, also called full-access or European style, that omits the face frame so doors attach directly to the box for a sleek look and wider openings.
Drawer slides that allow the drawer box to pull completely out of the cabinet, giving full access to its contents.
A door and drawer configuration where the fronts nearly cover the entire cabinet box, leaving only a thin reveal between doors for a modern, streamlined look.
A kitchen layout with cabinetry and countertops on four sides, forming a "G" shape with a peninsula that partially encloses the workspace.
A narrow kitchen layout with two parallel runs of cabinets and countertops facing each other, common in smaller or apartment-style homes.
A wall cabinet accessory, often with pegs or a wine-glass holder insert, used to store and display stemware.
A tinted finish applied over paint or stain and wiped back to settle into corners and profiles, adding depth, contrast, and an aged appearance.
A door configuration, also called partial overlay, where the door covers half the thickness of the face frame stile, leaving a visible frame around each door.
A hard, durable domestic wood with dramatic color and grain variation, popular for rustic or country-style cabinetry.
An engineered wood panel denser and stronger than standard MDF, often used for drawer bottoms and cabinet backs.
A cabinet door style where the door sits flush within the face frame opening rather than overlaying it, requiring precise, tight-tolerance construction.
A decorative or finished panel applied to the end or side of a kitchen island to match the surrounding cabinetry.
A kitchen layout with cabinets and countertops running along two perpendicular walls, forming an "L" and leaving the rest of the room open.
A rotating shelving unit installed in a corner cabinet that spins to bring stored items within easy reach.
A narrow strip of trim installed under wall cabinets to conceal under-cabinet lighting fixtures and wiring from view.
A hard, light-colored wood with a fine, subtle grain; one of the most popular cabinet woods for both painted and stained finishes.
An engineered wood panel made from compressed wood fibers and resin, valued for its smooth, uniform surface that holds paint exceptionally well.
A durable, low-maintenance laminate surface bonded to particleboard or MDF, commonly used for cabinet interiors and boxes.
A joint formed by cutting two pieces of trim or molding at matching angles, typically 45 degrees, so they meet cleanly at a corner.
Decorative wood trim used to finish and accent cabinetry, including crown, light rail, and baseboard styles.
A traditional joinery method where a projecting tenon on one piece fits into a matching mortise slot on another, commonly used in face frame and door construction.
A thin strip of wood or metal dividing a glass-front cabinet door into smaller panes, often arranged in a grid pattern.
A strong, heavily-grained hardwood available in red and white varieties; a long-time cabinetry staple known for durability.
An S-shaped decorative profile, combining a concave and convex curve, commonly seen on molding edges and raised panel door details.
Trim used to finish and protect the exposed outside corner where two cabinet runs or end panels meet at an angle.
A tall cabinet built to house a wall oven or microwave/oven combination at a convenient height, often including storage above or below.
How much a cabinet door or drawer front covers the face frame or cabinet box edge; overlay amount defines styles like full, partial, and inset.
A door configuration, also called half overlay, where doors cover only part of the face frame, leaving a visible strip of frame between openings.
An engineered wood panel made from compressed wood chips and resin; an economical substrate often used in budget cabinetry and cabinet interiors.
A countertop and cabinet run that extends outward from a wall or row of cabinets, connected on only one end, often used to define a kitchen space.
A decorative, column-like vertical piece attached to the face of a cabinet, often used at the ends of a run for an architectural accent.
An engineered wood panel made of thin layers of wood veneer glued with alternating grain direction, valued for strength and resistance to warping.
A trim piece with a quarter-circle profile, used to cover gaps and transitions such as where a cabinet meets the floor or another surface.
A horizontal piece of wood in a face frame or cabinet door, running between stiles to form the top and bottom of the frame.
A door style with a center panel milled higher than the surrounding frame, creating a dimensional, traditional appearance.
A door style, also called a flat panel, where the center panel sits below the surrounding frame rather than above it, as seen in Shaker-style doors.
The visible gap or border left between a full overlay door or drawer front and the edge of an adjacent one or the cabinet box.
A shelf mounted on drawer slides inside a base cabinet, allowing it to pull fully out for easy access to pots, pans, or pantry items.
Short for "Ready-to-Assemble" — cabinets shipped flat-packed with all necessary hardware, designed to be assembled on-site to reduce shipping costs and labor.
A thin, flexible strip of trim used to fill and finish the gap between a cabinet and an uneven wall or ceiling surface.
Drawers fitted with glides that pull the drawer the last inch shut once pushed most of the way closed, without a soft-close cushioning action.
A simple, five-piece door style with a flat recessed center panel and clean, square frame edges, inspired by traditional Shaker furniture.
Drawer slides mounted to the sides of the drawer box and cabinet interior, a common and economical mounting method.
A thin decorative panel applied to a cabinet end or exposed surface to give it a finished, furniture-grade appearance matching the doors.
A flat, single-panel door or drawer front with no frame, panel, or profile detail, giving a minimalist, contemporary look.
Drawers equipped with a hydraulic or mechanical damper that slows and quiets the final inches of closing, preventing slamming.
A vertical piece of wood in a face frame or cabinet door, running alongside the rails to form the sides of the frame.
A vinyl film heat-fused over an MDF substrate to create a smooth, seamless, moisture-resistant door surface, often in a solid color or wood-grain print.
The recessed area at the base of a cabinet, typically about 4" deep and 3" tall, that allows room for feet to stand comfortably at the counter.
Decorative wood pieces, including molding, filler strips, and panels, used to finish and unify a cabinet installation.
A kitchen layout with cabinetry and countertops along three connected walls, forming a "U" and offering ample storage and counter space.
Drawer slides mounted beneath the drawer box rather than on its sides, hidden from view and typically paired with soft-close mechanisms.
A decorative strip of wood installed along the bottom of a wall cabinet, often above a sink, to add detail without a full cabinet door.
A clear protective topcoat applied over stained or bare wood to seal and enhance the natural grain while guarding against moisture and wear.
A thin slice of real wood adhered to a substrate like plywood or MDF, giving an engineered panel the appearance of solid wood.
A cabinet mounted above the countertop, typically 12"-42" tall, used for upper storage in a kitchen.
The classic kitchen design principle connecting the sink, stove, and refrigerator in a triangular layout to minimize steps during meal prep.
